Terrace waterproofing is the key to the structural stability of a building.Monsoon season particularly in tropical countries can make/harm the strength and aesthetic appeal of a building.
Terrace waterproofing is a simple 4 step process :-
- Base Preparation: The top slab or terrace slab which needs to be waterproofed has to be leveled with cracks filled and loose particles removed to receive the succeeding layers.
- Base Layer: This is a mortar layer mixed with waterproofing chemicals and laid to a nominal slope with weep holes provided as required. The purpose of weep hole is that of check point which shall communicate the failure of the top layer over years of wear and tear before water seeps into the habitable spaces below.
- Coba Layer: The essential role of this layer is to provide slope to the flat slab to assist surface run off. Ideally laid at a slope of 1:100 (varies depending upon annual rainfall). The constituents of this layer can have brick bats or AAC bats as fillers depending on availability of material raised floor to accommodate service lines. Providing a double or triple layered waterproofing is necessary as it is not being done in a sunk slab and care should be taken that all supply and drain lines are provided such that they can be serviced without involving breakages if situation arises.
- Top Layer: The top layer should be abrasion free. This is essential for the life of the layer. Secondly, the top layer, either china mosaic, Roll on membrane,IPS as the case may be should be resistant to leakages as well as heat absorption. The joints in this layer should be detailed such that it is able to bear the weathering condition. Needless to say this layer needs the right waterproofing expert in Mumbai for execution.
For the perfect planned and executed waterproofing, get in touch with the experienced waterproofing contractors in Mumbai.